The amusing dating gibson tuners think, that
Posted in Dating
Early on, this left the binding "raw". Then with the advent of sprayed lacquer, after the binding was scraped, a clear top coat were applied over the entire instrument including the scraped binding.
For example some Lloyd Loar mandolins had this finish. This was short lived though. A faded sunburst on a Les Paul Standard.
With the pickguard removed we can see how much brighter the original red was in the sunburst under the pickguard. This is particularly noticable by the neck pickup pickguard attachment point.
How to Replace a Tuner/Tuning Peg on a Gibson Style Guitar
During the late 's, the red ainline used in their sunburst finishes often faded. This problem was fixed by mid, though sometimes you see it on later 's models. Left: Oval white label as used from spring to January Right: Orange label as used from January to The to orange labels are identical, except for the added text "union made". Left: Orange "union made" label as used from to Note the "union made" designation to the left of the "Gibson" insignia.
When Gibson was bought by Norlin inthousands of these labels were discarded and replaced with white and purple "Norlin" labels. These blank unused labels were snatched up by many guitar dealers, and are still available today. Rigth: White label used from to This particular label is from a L-4 model. Seen through this f-hole is the "Norlin" white rectangle label with purple and black trianglesused from to Labels hollowbody models only.
Rectangular label, no serial number or model name on label, photo of Orville Gibson and lyre-mandolin on label, date sometimes penciled under top: to Oval label with serial number, no model name, photo of Orville Gibson and lyre-mandolin: to White label with number and model name, number range to Hand ink or penciled some overlap with previous style : to White label with number and model name Ink stamped: to White oval label with number preceded by "A-": spring to January Note white label numbers A to A were not used.
Orange oval label with number preceded by an "A": Jan to Note the "-" after the "A" was dropped for the orange labels.
The first step in dating your Gibson SG is buying it a nice bouquet of flowers Seriously though, the best way to date a vintage SG is not through the serial number, but rather by the potentiometer codes and other features it has. Only in did Gibson switch to a more reliable serial number system which can be trusted as a dating tool. Even then, you want to have a rough idea of when it. Nice complete set for gibson guitars dating sites that make it looks to ream. Dating to chip away at this year's summer namm show, with off-white. Funny quotes about the bushings: n Dating from a direct replacement kluson mbg33n back lock tuners 90 kluson vintage kluson sd90sln tuners appear in addition, gold, ; likes given.
Orange oval label with number matching number on back of headstock number range to : to Don't read too much into a label that has or does not have "union made", as both label types were used throughout the s. White rectangle "Norlin" label with black and purple triangles: to Electric Archtop Bodies.
Tops: Before WW2, tops on electric archtops are solid spruce. Back and Sides: Before WW2, back and sides are solid maple.
From toall models including the above use laminated maple back and sides. Also note the "made in USA" stamp. Neck Shape Spanish models. WW Known as "baseball bats" due to the large back size. The era necks are often considered the best of this era; large and comfortable without being huge.
Back shape is about the same as the era, but the narrow nut width makes these necks feel like "pencil necks". Nylon, a thermoplastic material, was invented in by Wallace Carothers at DuPont. Bridge, flat top models. Retangular bridge, most models: WW2. Martin-type belly bridge, some banner-logo examples: WW2. Upper belly bridge above bridge pins : early 's Plastic bridge, most models below SJ: Indian Rosewood used instead of Brazilian: Lower belly bridge below bridge pins : Upper belly bridge above bridge pins : present.
Adjustable bridge saddle: Je from introduction : Option on J, J, SJ: Standard on most models: Init changed to a "compensated" style unit with "stairsteps" for each string. Right: tunematic bridge "no wire" and stop tailpiece on a goldtop Les Paul note the partial shown white covered P "soapbar" pickup at the bottom of the picture.
Tunematic bridges started showing up on many Gibson models in Used on some models ES and ES until This tailpiece was used until the 's on some models including the SG Junior. This was an important change on wrap around tailpieces, because it stopped the wrap-around from leaning forward and cracking the body wood often seen on Les Paul Juniors and Specials. Many electric archtop models also converted to the tunematic bridge.
The wire goes over the six saddle screw heads to prevent the saddles from popping out during string changes. Stop tailpiece now chrome plated too, and replaced on many models like the ES with a trapeze tailpiece.
How To Date Your Gibson Guitar
Two early "P. Left: Top to bottom: P pickup, Alino pickup, Humbucking pickup, "double white" humbucking pickup with metal cover removed. Right: P pickup top and a P. Two variations, one almost 6" long extending diagonally from the bridge to almost the neck, the other shorter and more conventional looking and mounted at less of an angle.
Both seen on ES model: Finger rest pickup system: First cataloged as a "conversion" pickup. Volume and tone controls and pickup integrated into the pickguard. Available with 1 or 2 pickups. Also known as the "McCarty" pickup system. Available for acoustic archtops such as the L-7, L-5 and Super Fixed pole P pickup.
Non-adjustable pole P pickup, single coil, 6 magnet slugs down center, black "dog ear" pickup cover: P pickup. Same as fixed pole P, except now has adjustable slot-head poles: present "Soapbar" P pickup, same as above, but pickup cover has no "ears": present Alnico V pickup.
Looks like a P soapbar pickup, except has "staple" poles with adjusting screws next to the poles. Used on upper line models: Top: A late "P. Bottom: A mid's "Patent No. Humbucking pickup. One row of 6 adjustable slot-head poles off-center: present. Cover was gold, nickel or after chrome plated. Prior to about mid, have small decal on bottom stating "Patent Applied For". These are known as "P. Starting in about mid to earlya "Patent No. Most humbucking pickups first year have no decal, and a more squarish stainless steel cover.
Also to early P. The internal plastic coil bobbins are usually black plastic, but sometimes they are white this happened mostly in or early You can see the color of the wire bobbins by removing the small underside mounting screw instead of removing the pickup cover. More information and pictures of PAF pickups can be seen here. The pointed pickguard used on most Gibson flattops from to the 's. Note this Southern Jumbo's "double parallelagram" fingerboard inlays and the "belly up" style bridge opposed to Martin's bridges which had a belly down towards the endpin.
Most Gibson pickguards prior to the mid's were made from celluloid. This material can deteriote with time the tortoise colored pickguards especially exhibit this trait. Flattop pickguards: from the 's toGibson flattop pickguards were usually "teardrop" in shaped. But in earlymost models changed to a "pointed" pickguard that followed the shape of the guitar except for the point.
The J was an exception to this rule; it's pickguard stayed the same shape, but the material and the designed changed. Prior tothe J has an engraved celluloid pickguard. Starting inthis changed to an injection molded styrene pickguard that was cheaper to make. The edges were cut beveled to make them look like they had binding. Inthe bevel changed from being very wide and flat, to a narrow and steeper cut.
Top row: on the left is the first Gibson electric knob as used on ES model guitars from to early no numbers. Next to it is the ugliest pre Gibson knob, known as the "amp" knob, used from late to the mid's but not on all models. Middle row, left to right: Tall numbered gold knob, used from to"speed" knob as used from to"bonnet" knob as used from to"metal top bonnet" knob or "reflector" knob as used from mid to mids on many, but not all models. Bottom row, left to right: switch tips used.
The left switch tip was used on multiple pickup models from after WW2 to about This knob is bakelite and very amber in color.
Next to it is the version where the switch tip changed to a plastic material that stayed white, and had a visible seam.
Bottom row black knobs, left to right: depending on the color of the guitar, some models starting in the early 's used black versions of the above gold knobs. These correspond to the same years as the above gold versions. Smooth rounded top, bumps around top edge, some with arrow across top, 1 black and 1 brown: Smooth top, 8 sided, arrow across top, 1 black and 1 brown: Radio knob.
Looks like a hat box, flared base, back painted gold or black, clear with numbers 1 to 10 visible thru knob: to mid Bonnet knob with metal cap "reflector" knobs : Used from mid to mids. Similar to bonnet knob but now has metal cap with "Volume" or "Tone" printed in black on the metal cap. There are two styles of this knob. First was used from mid to the end ofand have a shallow post hole as viewed from the side.
The and later relector knob has a deeper post hole the bottom of the post hole comes much closer to the metal cap. Also the reflector on these knobs can be silver or gold. Guitars with nickel or chrome hardware should have silver caps. Guitars with gold hardware should have gold caps though often the gold does wear off.
The Gibson Serial Number Decoder currently supports 6 formats from 4 Factories. For guitars made prior to use the extended search function. This new function will try to match the serial number against older formats, details required for an exact match are listed in yellow. Often these tuners are often mis-identified as late s tuners because of the vetical "Kluson Deluxe" stamping. Gibson used this style of tuner later than Fender. Fender stopped using this style in late Gibson stopped using this style in early (perhaps Gibson had a larger stock pile of these tuners). to Kluson tuners. How To Date Your Gibson Guitar. Posted on by Admin. Comments This Article is designed to assist in dating and/or identifying instruments manufactured or distributed by Gibson Guitar Corp. Please note that most of this information relates to serial numbers used from to present. For more details on Gibson Serialization.
Barrel knob. Back painted gold or black, clear with numbers 1 to 10 visible thru knob: to present. Note this knob was used primarily on Les Paul Custom models till the mid 's, when most other models got these knobs. Amp knobs. Black knobs with white numbers 1 to Looks like "blackface" Fender amp knobs: late - mid 's.
Some models never got these knobs such as the and later Les Pauls. Used mostly on the hollowbody and semi-hollow models, such as the ES series. Switch Tips: on guitars with two pickups and a 3-way selector switch, Gibson used an amber-colored bakelite switch tip during the 's. Starting in mid, they switched to a much whiter and slightly rounder tip plastic switch tip. Left: to bonnet knob. Middle: mid to "reflector" knob.
Right: to mids "reflector" knob. Metal Hardware. Phillips head screws started to be used at Gibson in the phillips head screw was original patented in Prior toall screws should be slot style. Prior toall metal hardware is either nickel or gold plated. Starting inall hardware is either chrome or gold plated. Left: "3 on a plate" style Kluson tuners, as used on the lower-line Gibson models. Right: Kluson Deluxe "tulip" tuners on a Les Paul.
Note this is the "single ring, single line" variety used from to The "single ring" refers to the single ring around the plastic button. The "single line" refers to the single line of vertical text saying "Kluson Deluxe". Note the "inked on" serial number.
Gibson Serial Numbers Present This section is designed to assist in dating and/or identifying instruments manufactured or distributed by Gibson Guitar Corp. Please note that most of this information relates to serial numbers used from to present. 54 rows Dating Gibson Guitars. from treasuresforthesoul.com - The Early Years In the first 45 years . Tuners. During the 's and 's, Gibson used Kluson tuners almost exclusively. There were some exceptions; starting in you could special order Grover tuners instead of Klusons on many mid to upper line models including the Les Paul Custom and J models.
During the 's and 's, Gibson used Kluson tuners almost exclusively. There were some exceptions; starting in you could special order Grover tuners instead of Klusons on many mid to upper line models including the Les Paul Custom and J models.
ByGibson starting using tuners with the "Gibson Deluxe" name on them, but these were actually made by Kluson. More info on Kluson tuners can be found here.
Again Phillips head screws started to be used at Gibson in the phillips head screw was original patented in Kluson Deluxe Tuner specs models including 3-on-a-plate and "tulip" designs : to early "Kluson Deluxe" in a single vertical line on the ribbed metal tuner cover aka "Single Line". NO outside hole on the metal cover for the tuner worm shaft. On the bottom side of the tuners stamped into the metal it says " PAT.
Tulip plastic tuners knobs have a single ring around them. The exterior "PAT. Still no outside hole in the metal tuner cover for the tuner worm shaft. The exterior lubrication holes can be either small or large. There is still now an outside hole in the metal tuner cover for the tuner worm shaft. These tuners are often called "No Line, Single Ring".
Mid to late Single line "Kluson Deluxe" in a single vertical line on the ribbed metal tuner cover. Late to mid Single line "Kluson Deluxe" in a single vertical line on the ribbed metal tuner cover. The exterior lubrication holes can be either small or large though most are large hole. Mid to Two plastic rings on the plastic "tulip" tuner knob. These tuners are often called "Single Line, Double Ring".
On keystone tuners, the buttons become have a slight green tint to them. These tuners are often called "Double Line, Double Ring". The base plate for the tuners also has a more rounded look to it with the edges less defined. This happened because the dies that stamped out this part were wearing out. The original Kluson tuners company went out of business in so this style of tuner was not made again until the s when WD Guitar Products bought the Kluson name and reissued these tuners.
PegHead Markings other than Serial Numbers "seconds" Gibson often marked inferior quality guitars as "seconds", and sold them at a discount to dealers or employees. These markings were stamped into the wood on the back of the peghead. A "2" stamp is sometimes seen, designating a "second", which had some cosmetic flaw.
If there is a serial number on the back of the peghead, the "2" is usually seen centered above or below it. Also sometimes stamped was "CULL", which is another designation of a second. Again, this stamp is seen on the back of the peghead. The worse Gibson reject is the "BGN" stamp, designating that instrument as a "bargin" guitar. These were only sold to employees at substantial discounts.
This stamp is also seen on the back of the peghead. BGN instruments weren't acceptable to Gibson as sellable to the public. All second instruments are usually worth less than the same guitar that is not a second given condition as the same. BGN instruments are worth less than a second instrument because these tend to have some fairly serious cosmetic flaw.
A war-time Southern Jumbo that was exported to Canada. This is sometimes stamped on the back of the peghead where a serial number would be on and later Gibsons.
Also it's sometimes seen on the top edge of the peghead. An EStc from the 's, as seen through the bass side "f" hole. Model Body Markings non-Artist models. After WW2, lower-line Gibson vintage instruments did not have a label to designate the model.
Instead, Gibson just ink stamped the model number inside on hollow body instruments. If the instrument had "f" holes, this number was ink stamped in the bass side "f" hole on the inside back of the instrument. If the instrument was a flat top guitar, this number was ink stamped inside the round soundhole on the inside back of the guitar. Gibson Cases Mid to high-end model guitars during the 's and early 's used a black case with a red line around the top edge of the case.
The inside is a deep maroon color. Lower models used black rigid cardboard cases. Aboutmid to high end model started to use a tweed case with a 3 inch wide red "racing stripe" on the tweed. The inside of these cases are also usually a deep maroon. These tweed cases were used up to WW2. Post-WW2Gibson offered 3 different cases. The "low grade" case was an "alligator" softshell case, essentially made of rigid cardboard with a sparse brown lining.
This case also often had a hard thin brown plastic handle that cracked very easily. The "medium grade" case was a wooden case with a smooth brown outside and usually a sparse green lining though different color interiors are seen. The "best grade" known as the "faultless" case was the "California Girl" case, as it is known. This wooden case has a rich brown outside like a tanned California girland a very plush and rich pink inside. The handle on the medium and high grade cases was leather covered metal.
Note some models such as the Les Paul did not have a medium grade case available either got the 'gator case or the Cal Girl case. Though any s era of these three LP models could also have a four latch case. Most 's Gibson cases had a small 1. This was located on the side of the case by the handle. Note during this period there where three different manufacturers making cases for Gibson, all with the same basic specs, but slightly different shapes Lifton, Geib, Stone.
Geib cases are seen mostly in the early 's, and Lifton cases in the mid to late 's.
Dating gibson tuners
Stone cases are seen throughout the 's, but not to the extent of the other two manufacturers. The new low-end case was a black softshell with a plush deep red lining.
The medium grade case was dropped entirely and the new high grade case was black on the outside, and yellow on the inside. The black outside changed from smooth to rough during different periods of the 's. Also the handle changed from a leather covered metal to a hard molded plastic type about The small brass Gibson plaque was still used until the later 's. In the 's, the new high-end case was still a wooden case with a black outside, but a deep red inside. Most 's cases had "Gibson" silkscreened on the outside of the case in white.
Also made during the 's is the "protector" case; a huge thing made completely out of molded plastic. This case was very popular for Les Pauls.
A picture of a mid's Les Paul brown case is here. This is not the most desirable of the Les Paul brown cases, as it has a flat top and four latches typically this style of brown case was sold with Les Paul Specials and Juniors. Starting about mid to latethe brown Les Paul case changed to a five latch model. This is considered the "Sunburst" case even though most models still use the older four latch case.
These newer cases have a tag on the inside pick pocket that says "Made in Canada". Also, these cases have a pink interior satin cover that goes over the top of the guitar before closing the case. And they also have a combination lock on the main exterior latch and a leather handle. There were also some early 's brown reissue cases mostly for Les Pauls and Korina reissues that are starker versions of the Canadian reissue case.
Most recently Gibson has copied the original 's Cal Girl case more exactly on their "historic" series reissues. The easiest way to find the year of a particular Gibson instrument is usually by referencing the instrument's serial number of factory order number.
This following information applies to all Gibson instruments including guitars, mandolins, lapsteels, basses and others. This information was compiled from these sources: A. Duchossior, W. Carter, G. Gruhn, E. Whitford, D. Vinopal, D. To make things even more interesting, they sometimes wrote the serial number or factory order number with a near-invisible pencil, sometimes ink-stamped it in disappearing ink it seemsand sometimes pressed it into the wood.
And the placement of these serial numbers and FON's factory order numbers can be different, depending on the era. Gibson serial number consistency was never given much thought, as Gibson changed serial number system many times. Hence, some serial numbers may be duplicated in different years.
This is especially noticable during the 's. Many people ask, "How can I tell the difference between a serial number and a factory order number? Sometimes this is difficult, but you have to look at the format of the number, and the general era of the instrument.
Does it have a pre-WW2 script "Gibson" logo? If so, then just look at the pre-WW2 serial number and factory order number info. This would be the single biggest question to ask, as pre-WW2 and post-WW2 instruments are numbered quite differently.
Also, examine the placement and style of the numbers and make sure it follows the schemes described. Another question asked is, "The FON number says the instrument isyet the serial number says ; why are they different? There is a very logical reason for this. The FON number is stamped on the instrument very early in the manufacturing process. Most times, the serial number is applied as one of the last steps especially on pre hollow body instruments when the instrument is nearly finished.
Depending on the demand for the instrument, it could take Gibson up to 6 months to finish the instrument. Hence the FON number could be one year, and the serial number the next year.
It wasn't till that Gibson came up with a good serial number system that will last them indefinately. This new serial number system allows determination of the exact date the instrument was stamped with the serial number, and the factory of manufacturer. Or serial number and model name on white paper label, number range from tohand inked or penciled toink stamped serial number to Some models with an ink stamped 3 digit number on neck block. The FONs were issued sequentially and provide a good way to date a Gibson guitar.
It was like in the FONs were pre-printed, and someone dropped the pile on the floor. Now FONs contain a letter A to G, ink stamped on the inside back or on the neck block flattopsor on the label. Pretty much sequentially ordered. Gibson Factory Order Numbers, to - Overview. The Factory Order Number FON consists of a 3, 4 or 5 digit batch number followed by a 1 or 2 digit sequence number usually from 1 to 40, but there were some double or triple batches where the numbers were higher.
This should be an 8 digit number that can be dated by the 1st and 2nd digits as follows:. The pattern is as follows. Prior to when the Kalamazoo, MI factory was closed, the numbers indicated Kalamazoo production. Ranking numbers continued to indicate Nashville production through Ranking numbers for Bozeman start each day at and the electrics may start as low as the s.
The sixth number is now a batch number- batch 0 starts at the beginning of the day, and once we stampthe batch number will change to 1. The first 5 numbers remain the same, the last 3 numbers will remain the same. The only difference is the addition of this batch indicator. There are always exceptions to these rules, the two listed below are worth noting:.
Most will be 5 to 6 digits in length, but the earliest examples feature 4 digit serial numbers. There should be a space after the 1st digit with the 4 and 5 digit serial numbers, and no space with the 6 digit numbers. The 1st and 2nd indicate the year of manufacture for the 6 digit serial numbers which we've been using since Those beginning with "94":.
InGibson's Centennial year, many instruments have a serial number that begins with "94" for the year, with the remaining 6 digits indicating the ranking number. Gibson Custom. Carved Top models serial number on orange label. Learn more. Products New. Guitar Electric Guitars. Acoustic Guitars. Electro Acoustic Guitars.
Classical Guitars. Pedals and Effects. Guitar Amps.
Guitar Accessories. Starter Packs. Bass Bass Starter Packs. Bass Guitars. Bass Amplifiers. Bass Effects Pedals. Bass Accessories. Electronic Drum Kits. Electronic Pads. Drum Hardware. Drum Accessories.
Single Shells. Keys Home Pianos. Stage Pianos. MIDI Keyboards. Keyboard Amplifiers. Keyboard Accessories.
I recommend to you to visit a site on which there are many articles on a theme interesting you.02.02.2020|Reply